Buy Anthem PVA 7 - Seven Channel Power Amplifier at Best Price in India – Ooberpad
Cart 0

Ooberpad

Anthem PVA 7 - Seven Channel Power Amplifier

Customer Reviews

₹ 216,000.00

Ooberpad brings you the Anthem PVA 7 - Seven Channel Power Amplifier with 125 watts per channel. The PVA 7 is part of Anthem's value-priced Performance Series. Anthem’s PVA 7 amplifier is anything but average. Unlocking the incredible sound sculptures, special effects and dynamics of today’s home theater and multichannel music recordings is no small feat, at least for the average amplifier. It is equally at home delivering all of the thundering impact and excitement of a surround sound movie experience imparting the subtle nuances of a multichannel music performance or paying rich sonic tribute to the sweeping highs and lows of your favorite two-channel recording.

Its rated power is 105 watts per channel into 8 ohms, and 140 watts into 4 ohms. Whenever you see an amplifier with higher output into 4 ohms than 8 ohms, it's usually a good sign. It means the amp has a robust regulated power supply. The ability to drive 4-ohm speakers is a nice benefit because these days there are lots of high-performance 4-ohm speakers that many typical A/V receivers would struggle to drive. Actually, if your receiver has multichannel preamp outputs, you can easily connect the PVA 7 and use it to drive your main, surround, and back surround or height channels.

Anthem's proprietary and patented circuit designs follow the company's "Keep-It-Simple" principle, using the fewest number of parts in the signal path to maintain sonic integrity. In addition to its high instantaneous power output, the PVA 7 has the finesse to handle the wide-ranging challenges of movie special effects and demanding musical passages.

Warranty:

1-year manufacturer's warranty

Key Features:

  • Class AB design with 4 high-current bipolar output transistors per channel for low distortion
  • 105 watts per channel into 8 ohms, 140 watts per channel into 4 ohms for compatibility with even difficult-to-drive speakers
  • Advanced Load Monitoring™ technology 
  • Custom low-noise, high-power toroidal transformer for stable, noise-free operation
  • 3-way on/off operation: manual, triggered, or signal-sensing auto on/off
  • Unbalanced RCA inputs for all seven channels
  • Binding post terminals accept bare wire, banana plugs, and spade lugs
  • 3.5mm trigger in/out jacks allow the amplifier to be turned on or off remotely
  • Detachable power cord
  • Designed, engineered, and manufactured in Canada

      Benefits of Anthem PVA 7 - Seven Channel Power Amplifier:

      A Passion For Better Sound

       

      Before pragmatic design, before performance testing and long before production comes passion! A passion to produce something exceptional. Anthem products are extraordinary, meeting and exceeding the needs and expectations of audiophiles everywhere. Whether for personal or professional use, Anthem products are world class leaders in high-end performance and value.

      Exemplary circuit design


      The sonic purity of the PVA amplifier design is the result of Anthem's intensive research and development in high-end design. Superior high-end sound begins with a superior power supply. These amplifiers use custom-built, low-noise, high-power toroidal transformers and advanced power supply regulators with high-quality, low-ESL/low-ESR filter capacitors and huge storage capacity. Anthem's proprietory and patented circuit designs follow the ‘Keep-It- Simple’ principle, using the fewest number of parts in the signal path to maintain the integrity of sound. 

      These amplifiers provide the finesse and instantaneous output power to effortlessly reproduce the challenging variety of special effects in movies and demanding musical passages. They are stable as a rock, even into difficult loads. PVA amplifiers can be powered On/Off three ways: manually, with the On/Off switch on the front panel; remotely, via the 12-volt trigger input; or automatically, with our patented Auto-On/Off circuit - an incoming audio signal immediately switches it on, and approximately 20 minutes after the audio signal ends, it simply switches off.

      Superior component parts & materials



      Superior performance demands superior components and materials. PVA amps are designed and built in North America using the finest quality parts and materials. From military-spec (FR-4-rated) epoxy circuit boards to multiple high-current bipolar-output transistors; from oversized, computer designed heatsinks to Anthem's own custom-designed robust binding posts, the build quality of these amps ranks among the finest in the world.

      22 Db Signal-to-noise ratio

      Whether it’s the subtle (or not-so-subtle) special effects in a movie, or the tonal subtleties produced by the strings of a single violin, PVA amplifiers capture it all! Ultra-low distortion and a truly incredible signal-to-noise ratio place these amplifiers among the cleanest and quietest on the market. From a silent black background, sound appears in its purest form to envelop you in powerful emotion.

      Where to buy:

      Buy the Anthem PVA 7 - Seven Channel Power Amplifier online at the best price in Mumbai, Delhi, Bangalore, Chennai & all across India. Enjoy expert, prompt & courteous customer service from the Ooberpad team. We will help you choose better & give you all the support you need to take the right buying decision in India.

      Technical Specifications of Anthem PVA 7 - Seven Channel Power Amplifier:

      Brand & Model # Anthem PVA 7 
      Power output per channel
      1 channel - 125 W
      All channels - 105 W
      1 channel - 200 W
      All channels - 140 W
      1 channel - 300 W
      All channels - Nil
      Inputs/Outputs
      Inputs
      7-Single-Ended, 1 Relay Trigger (3.5-mm Mono Jack)
      Outputs
      7 Pairs Speaker Binding Posts, 1 Relay Trigger(3.5-mm Mono Jack
      Other Specifications
      Headroom
      1.25 db (8 Ω); 2.13 db (4 Ω)
      Power Bandwidth
      10 Hz - 80 kHz (125 W @ 8 Ω)
      Frequency response
      20 Hz - 20 kHz (-0.20 db); 5 Hz - 100 kHz (-2.5 db)
      THD + N
      <0.002% @ 1 kHz; <0.03% @ 20 kHz (100 W into 8 Ω)
      Input sensitivity
      1.12 VRMS for 125 W into 8 Ω
      Input impedance
      10 kΩ
      Damping factor
      200 @ 1 kHz (ref. 8 Ω)
      S/N ratio
      122 db, A-weighted (ref. 125 W)
      Channel separation
      >65 db (100 Hz - 10 kHz)
      Voltage gain
      29 db
      Slew Rate
      28 v/µs
      Power requirements
      1500 W @ maximum power output (8 Ω load)
      Dimensions (H x W x D; 
      heights include feet)
      5-7/8" (14.9 cm) High x 17-1/4" (43.8 cm) Wide x 16-3/8" (42 cm) Deep
      Weight
      47.3 lb (21.5 kg)

      Customer Reviews


      More from this collection