Crestron CLCI-1SW2EX-W Wireless In-Ceiling Switch

₹ 12,613.00

Ooberpad brings to you Crestron CLCI-1SW2EX-W Wireless In-Ceiling Switch. The CLCI-1SW2EX-W is a two-channel switch that comes with the ability to control two independent, 230 Volt AC lighting loads. Its pro-ultra-slim design enables it to be easily installed in the ceiling, either next to or close to the fixture. 

Powered by infiNET EX® technology, this CLCI device is best equipped for wireless communication with the Crestron® control system, making it an ideal choice for both new and retrofit applications. In addition to that, the switch installs inline, eliminating the need for any special wiring and can be controlled via a standard light switch.


Warranty

1-year manufacturer warranty

Key Features:

  • Controls up to 56 loads
  • Cresnet® communications
  • Local controls for testing and verification
  • Local and remote override capability
  • Non-volatile power failure memory

Benefits of Crestron CLCI-1SW2EX-W Wireless In-Ceiling Switch:

Crestron CLCI-1SW2EX-W Wireless In-Ceiling Switch

The CLCI-1SW2EX-W switches incandescent, tungsten-halogen, magnetic low-voltage, electronic low-voltage, fluorescent ballast, neon/cold cathode, and motor loads for each of the two independent channels. Two sets of screw terminals enable easy wiring to each load of up to 500 VA.

Easy Loop-Thru Wiring

Feeding each switch is a set of terminals that powers the unit. The second set of high-voltage terminals wired in parallel allows for fast, clean installation when deploying multiple CLCI units. There is no need for wire connectors or extra gang boxes; just “daisy chain” multiple CLCIs together. In certain retrofit applications, this enables you to create more zones from the original wiring.

Out-of-the-Box Control via Standard Switch

The CLCI-1SW2EX-W uses either a momentary or a maintained switch to provide a closure, such as a standard lighting switch. A standard lighting switch, the kind carried in any hardware store, is a cost-effective solution for basic on and off functions. A momentary, pushbutton-type switch can also be used to switch the load.

Complete Crestron Control

Because it’s connected to the Crestron system, the CLCI-1SW2EX-W can also be controlled from any keypad, touch panel, remote, or mobile device. Tie in occupancy sensors and photosensors together with Crestron Fusion RV® software for a complete solution to effectively manage room assets.

Simple Setup

Setup is simple, especially when using a connected maintained or momentary switch. A specific series of button presses initiates the wireless device’s acquire mode, so there’s no need to climb a ladder to join the device to the infiNET EX network.

Where to buy:
Buy Crestron CLCI-1SW2EX-W Wireless In-Ceiling Switch online at best price in Mumbai, Delhi, Bangalore, Hyderabad, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad team. We will help you choose better and will give you all the support you need to take the right buying decision in India.

Technical Specifications of Crestron CLCI-1SW2EX-W Wireless In-Ceiling Switch:

Brand & Model # Crestron CLCI-1SW2EX-W Wireless In-Ceiling Switch
Load Ratings
  • Number of Channels: 2
  • Maximum Load per Channel: 2AX (2A fluorescent)
  • Switch Load Types: Incandescent, tungsten-halogen, magnetic low-voltage, electronic low-voltage, fluorescent ballast, neon/cold cathode, motor
Input Voltage
  • 220 to 240 Volts AC, 50/60Hz, line power
Wireless
  • RF Transceiver: infiNET EX® 2-way RF, 2.4 GHz ISM channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
  • Range: 30 m (100 ft) indoors, 55 m (175 ft) outdoors for device to device;45 m (150 ft) indoors, 75 m (250 ft) outdoors for device to gateway; All distances subject to site specific conditions[1]
  • Gateway: Requires an infiNET EX gateway[2]
Connections
  • L: (3) Screw terminals, connect to line AC; Internal wiring in parallel
  • N: (2) Screw terminals, connect to neutral AC; Internal wiring in parallel
  • G: (2) Screw terminals, connect to earth ground; Internal wiring in parallel
  • R: (1) Screw terminal, connects to remote switch (remote switch wires to L and R; Consult manual for more information)
  • N1: (1) Screw terminal, neutral, channel 1
  • SL1: (1) Screw terminal, switched line power, channel 1
  • N2: (1) Screw terminal, neutral, channel 2
  • SL2: (1) Screw terminal, switched line power, channel 2
Controls & Indicators
  • Setup: (1) Miniature pushbutton, joins an infiNET EX network
  • Chan. 1: (1) Green LED, indicates load is switched on
  • Chan. 2: (1) Green LED, indicates load is switched on
Enclosure
  • Plastic
Environmental
  • Temperature: 0° to 40° C (32° to 104° F)
  • Humidity: 10% to 90% RH (non-condensing)
Dimensions (H x W x L)
  • 178 mm (7.00 in) x 55 mm (2.13 in) x 41 mm (1.63 in)

Weight
  • 199 g (7 oz)

You recently viewed

Clear recently viewed