Crestron DIN-1DIM4 - DIN Rail Dimmer

₹ 44,576.00

Ooberpad brings to you Crestron DIN-1DIM4 - DIN Rail Dimmer with 4 channels of dimming and Phase-Synchronous Detection Circuitry. The DIN-1DIM4 is a DIN rail mounted lighting control module with four channels of dimming. A single model supports both 120 and 220-277 Volt electronic and magnetic low-voltage, incandescent, neon/cold cathode, 2-wire dimmable fluorescent, and non-dimmable lighting loads up to 5 Amps per channel, 10 Amps total.

Warranty

1-year manufacturer warranty

Key Features:

  • 4 channels of dimming
  • 120 to 277 Volt 50/60 Hz operation
  • Selectable non-dim mode
  • Master air-gap relay
  • Override input
  • Cresnet® communications
  • Setup via front panel or software
  • Programmable functionality via DIN-AP3
  • 12M wide DIN rail mounting
  • CEC Title 24 2013 Compliant

Benefits of Crestron DIN-1DIM4 - DIN Rail Dimmer:

Phase-Synchronous Detection Circuitry
Crestron DIN-1DIM4

Proprietary zero cross filter technology from Crestron® provides superior immunity to noise on the power line, reducing lamp flicker and compensating for fluctuations in line voltage and frequency.

Master Air Gap Relay

When all four channels are turned fully off, the internal master relay automatically opens providing air-gap isolation to allow safe servicing and changing of light bulbs on all four controlled circuits.

DIN Rail Installation

The DIN-1DIM4 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-1DIM4's front panel stays accessible while the connections are concealed.

Override Input

An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset level. Levels can be adjusted and saved locally from the front panel, or remotely via software.

Cresnet®

The DIN-1DIM4 communicates with a DIN-AP3 Automation Processor, or other Crestron 3-Series® control systems, via the Cresnet control network. A pair of Cresnet ports on the DIN-1DIM4 allows for easy daisy-chaining of several DIN Rail Series automation control modules.

Where to buy:
Buy Crestron DIN-1DIM4 - DIN Rail Dimmer online at best price in Mumbai, Delhi, Bangalore, Hyderabad, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad team. We will help you choose better and will give you all the support you need to take the right buying decision in India.

Technical Specifications of Crestron DIN-1DIM4 - DIN Rail Dimmer:

Brand & Model # Crestron DIN-1DIM4
Load Ratings
  • Dimmer Channels: 4
  • Maximum Per Channel: 5 Amps @ 120 to 277 Volts AC, 50/60 Hz; 600 Watts @ 120 Volts AC; 1150 Watts @ 230 Volts AC; 1200 Watts @ 240 Volts AC; 1385 Watts @ 277 Volts AC
  • Module Total: 10 Amps @ 120 to 277 Volts AC, 50/60 Hz; 1200 Watts @ 120 Volts AC; 2300 Watts @ 230 Volts AC; 2400 Watts @ 240 Volts AC; 2770 Watts @ 277 Volts AC
  • Load Types: Leading edge ELV, Incandescent, Neon/Cold Cathode, Magnetic Low Voltage, Dimmable 2 Wire Fluorescent, & Non-Dim Lighting
  • Minimum Load: 15 Watts/channel for Incandescent loads; 15 Watts/channel for Magnetic Low Voltage loads with Halogen or LED Lamps; 15 Watts for AC Dimmable LED loads operated in Auto/Forward-Phase Mode
    Connections
    • NET: (2) 4-pin 3.5mm detachable terminal blocks, paralleled; Cresnet® slave port
    • OVERRIDE: (2) 2-pin 3.5mm detachable terminal blocks, paralleled; Sensing input for external low-voltage contact closure; Activates override mode when a closure is present; Minimum Closure Rating: 10mA (per module) at 24 Volts
    • LIVE: (2) Captive screw terminals,[1] brown; Line power input
    • NEUTRAL: (5) Captive screw terminals,[1] blue
    • DIMMED LIVE 1 – 4: (4) Captive screw terminals,[1] red; Dimmer channel outputs 1 - 4
    • Ground: (5) Captive screw terminals,[1] green

      ** Captive screw terminals accept up to 12 AWG (2.5 mm²) wires per terminal.
      Controls and Indicators
      • NET ID: (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID; digits also display output levels and protection/error codes
      • SETUP: (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID
      • OVR: (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets
      • PWR: (1) Green LED, normally indicates AC line power is connected to either LIVE terminal, blinks when only powered by Cresnet
      • NET: (1) Yellow LED, indicates communication with the control processor
      • RESET: (1) Recessed miniature pushbutton, resets internal processor
      • DIM 1 – 4: (4) Red LEDs, illuminate when a corresponding channel is operating in forward-phase mode
      • NON-DIM 1 – 4: (4) Red LEDs, illuminate when a corresponding channel is operating in non-dim mode
      • Channel Mode Select 1 – 4: (4) Recessed miniature pushbuttons, used to select each channel’s operating mode
      • LOADS 1 – 4: (4) Red LEDs and (4) miniature pushbuttons for status indication and local control of each channel
      Input Voltage Line Power: 120 to 277 Volts AC, 50/60 Hz
      Enclosure
      • Aluminum with polycarbonate label overlay, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 12 DIN module spaces (216mm)
      Dimensions & Weight
      Height
      3.71 in (95 mm)
      Width
      8.49 in (216 mm)
      Depth
      2.35 in (60 mm)
      Weight 2.1 lbs. (0.96 kg)

       

      You recently viewed

      Clear recently viewed