Crestron DIN-HUB DIN Rail Cresnet Distribution Hub

₹ 22,696.00
No Cost EMI: Avail No Cost EMI on Bajaj Finserve and select Credit Cards for orders above ₹3000 Details

EMI Guide


EMI for Rs.

Below EMI options can be availed while making payment. To avail EMI continue to check out and chose the Credit Card option for payment.

Ooberpad presents the Crestron DIN-HUB DIN Rail Cresnet Distribution Hub - a 3-segment Cresnet hub for Cresnet networks with more than 20 devices and power distribution. This DIN rail-mounted Cresnet hub has been designed to facilitate the configuration of large Cresnet networks and enable modular installation alongside Crestron DIN Rail lighting and automation control modules and other third-party DIN rail mountable devices.


1-year manufacturer warranty

Key Features:

  • 3-segment Cresnet hub
  • For Cresnet networks with more than 20 devices
  • Configurable power distribution
  • No programming required
  • 6M wide DIN rail mounting

Benefits of Crestron DIN-HUB DIN Rail Cresnet Distribution Hub:

3-Segment Cresnet® Hub
Crestron DIN-HUB

Cresnet forms the fundamental network for all sorts of solutions provided by Crestron including lighting modules, wall box dimmers, shade controllers, thermostats, keypads, touchpanels, and many other devices. In a nutshell, it is Crestron’s communication highway. While its 4-wire bus normally supports 20 Cresnet devices without requiring a hub, users can easily add larger systems by adding the DIN-HUB. Featuring 3 isolated Cresnet segments, each supporting an additional 20 devices, allows for systems of approximately 80 devices total (including the "host" segment). More hubs may be added to allow up to a maximum potential of 252 devices.*

* The actual number of possible devices per segment and per network may vary depending upon the length and geometry of network wiring, and the power requirements of every device. A general rule of thumb suggests approximately 20 devices, an aggregate of 3000 feet of cable, and up to a 75 Watt load per segment (wiring and devices permitting). In any case, 252 is the maximum number of possible devices on a complete Cresnet network.

Cresnet Power Distribution

The Cresnet Distribution Hub features an override input to allow external contact closure to momentarily override the control system program and set each channel output to its default state. Users can also set the state locally using the front panel or remotely using supported software. Additionally, the Cresnet carries 24 Volts direct current powering the devices connected to it helping the user manage the distribution of power for the complete network.

Users can configure each segment to receive power from the host source or from another power supply. Users can also dedicate separate power supply for each segment - up to 75 watts.

DIN Rail Installation

Installing the DIN-HUB is easy as it is designed to snap onto a standard DIN rail and can be wall mounted. Detachable screw terminals positioned along the top and bottom allow easy access to the front panel, installation and servicing. When installed in an enclosure utilizing 45 mm cutouts, the DIN-HUB's front panel stays visible while the connections are concealed.

Where to buy:
Buy the Crestron DIN-HUB DIN Rail Cresnet Distribution Hub online at best price in Mumbai, Delhi, Bangalore, Hyderabad, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad team. We will help you choose better and will give you all the support you need to take the right buying decision in India.

Technical Specifications of Crestron DIN-HUB DIN Rail Cresnet Distribution Hub:

Brand & Model # Crestron DIN-HUB
  • NET HOST: (2) 4-pin 3.5mm detachable terminal blocks, paralleled; Connects to Master NET port of DIN-AP2 or other control system, and loops thru to additional DIN Rail Cresnet devices
  • NET PWR INPUT 24VDC, NET A – C: (3) 3-pin 3.5mm detachable terminal blocks; Cresnet power selection connectors for each segment; Connect to external Cresnet power supplies, or to “host” power source via jumpers, to power Cresnet devices connected to the NET A-C ports; Maximum Load per Segment: 75 Watts (3.13 Amps @ 24 Volts DC)
  • NET A – C: (6) 4-pin 3.5mm detachable terminal blocks comprising (2) Cresnet ports (paralleled) per each of (3) segments
LED Indicators
  • NET HOST, PWR: (1 green) Indicates Cresnet power is supplied to unit via either NET HOST port
  • NET HOST, NET: (1 yellow) Indicates Cresnet bus activity at either NET HOST port
  • NET A – C, PWR: (3 green) Indicate Cresnet power is available at NET ports of corresponding hub segment
  • NET A – C, NET: (3 yellow) Indicate Cresnet bus activity at NET ports of corresponding hub segment
    Cresnet Power Requirements
    • 0.6 Watts (0.03 Amps @ 24 Volts DC)
    • Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 6 DIN module spaces (108mm)
    Dimensions & Weight
    3.71 in (9.42 cm)
    4.18 in (10.60 cm)
    2.28 in (5.80 cm)
    Weight 6.0 oz (169 g)


    You recently viewed

    Clear recently viewed