Emotiva XSP-1 Stereo Analog Preamp for MC & MM Cartridges

Sold out
₹ 157,000.00

Presenting the Emotiva XSP-1 Stereo Analog Preamp for MC & MM Cartridges, available online on Ooberpad.  The XSP-1 is a high-quality stereo analog preamp that features a fully balanced signal path along with high quality relay signal switching. It also features a precision analog ladder volume control and a premium quality phono preamp that supports both moving magnet and coil cartridges, along with precision tone trim adjustments.

Warranty

1-year manufacturer's warranty

Key Features:

  • Audiophile quality, load invariant, high current headphone amplifier with independent level control and memory
  • Exceptional sound quality via an all-analog, fully balanced, differential signal path with vanishingly low noise and distortion
  • Full analog bass management with independent, individually configurable, Linkwitz-Riley 12 dB/octave high-pass and low-pass filters for the mains and subs
  • Informative, dimmable front panel VFD display shows level, status, and input selections
  • Excellent input and output flexibility: 2 sets of balanced inputs, 4 sets of unbalanced inputs, one set of balanced main outputs, and one set of unbalanced main outputs
  • Support for both stereo subwoofers and a summed mono subwoofer
  • Highly regulated and shielded toroidal power supply
  • Gold plated, solid brass machined RCA connectors and gold plated XLR connectors

    Benefits of Emotiva XSP-1 Stereo Analog Preamp for MC & MM Cartridges:

    Analog Stereo Performance Taken To The Next Level

    Emotiva XSP-1 Stereo Analog Preamp
     

    The fact that the Emotiva XSP-1 preamplifier is an excellent match for Gen 2 power amps is not the only reason we root for this system. The XSP-1 truly takes high performance to new levels. It features a brand new surface mount design which have resulted in significantly tightened component tolerances, shortened signal paths and matched the trace lengths between channels, thereby resulting in a greatly improved acoustic signature.

    All analog, audiophile technology and an advanced digital control system come together to form the XSP-1 Gen 2. This ingenious system is designed to maintain the purity of audio signals while similar offering advanced features, greater resolution and an accuracy that is much superior to other designs. Experience uncompromised sound using the Reference playback mode and avoid single ended to balanced conversations from the signal path. These features combined with instrumentation grade relays for input selection and high voltage and a digitally-controlled analog resistor ladder network with 0.5dB per step resolution for volume, helps the XSP-1 Gen 2 maintain signal integrity and channel matching even at very low listening levels.

    Advanced Features Ease System Integration

    Advanced Features Ease System Integration

    If there's one thing that differentiates the XSP-1 Gen 2 from other systems is its plethora of features - making it the ideal centrepiece for your audio system. Its features include the perfect integration of 2.1 and 2.2 systems along with a load variant headphone amplifier, an external signal loop, trigger input as well as output. Finally, it features a large VFD display that allows the user to view system status messages and gives them visual confirmation of all actions.

    The Control you need

    Unlike most audiophile preamps which don't allow users to fine tune the sound system, the XSP-1 Gen 2 offers contour controls that allow users to adjust the high and low frequency response of their system for an optimum listening experience. For absolute neutrality, the contour controls operate by switching networks of precision discrete tuning components.

    Ready for Legacy Sources

    Equipped with a quiet phono preamplifier which offers inputs for both moving magnet and moving coil cartridges (with user-selectable loading), the XSP-1 Gen 2 is far better than any of its competition. Its flexibility and ease of operation make this system perfect for an amazing listening experience.


    Where to buy?
    Buy the Emotiva XSP-1 Stereo Analog Preamp for MC & MM Cartridges online at the best price in Mumbai, Delhi, Bangalore, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad team. We will help you choose better and give you all the support you need to take the right buying decision in India.

    Technical Specifications of Emotiva XSP-1 Stereo Analog Preamp:

    Brand & Model Emotiva XSP-1
    Audio Specifications 
    • Balanced Input to Balanced Output:
      S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 117 dB.
      Frequency response: 20 Hz to 20 kHz +/- 0.02 dB.
      THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0004%.
      IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.001%.
      Crosstalk (measured at +6 dBF, 10 kHz): < 100 dB.

    • Unbalanced Input to Unbalanced Output:
      S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 113 dB.
      Frequency response: 20 Hz to 20 kHz +/- 0.015 dB.
      THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0006%.
      IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.001%.
      Crosstalk (measured at +6 dBF, 10 kHz): < 102 dB.

    • Balanced Input to Unbalanced Output:
      S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 114 dB.
      Frequency response: 20 Hz to 20 kHz +/- 0.015 dB.
      THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0005%.
      IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.0015%.
      Crosstalk (measured at +6 dBF, 10 kHz): < 105 dB.

    • Unbalanced Input to Balanced Output:
      S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 115 dB.
      Frequency response: 20 Hz to 20 kHz +/- 0.017 dB.
      THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0003%.
      IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.007%.
      Crosstalk (measured at +6 dBF, 10 kHz): < 100 dB.

    • Phono (Moving Coil; phono in to balanced out):
      Gain (1 kHz, Volume at 0): approximately 60 dB.
      Input impedance (user selectable): 47 ohms, 100 ohms, 470 ohms, 1k ohm.
      S/N (signal-to-noise ratio, A-weighted, ref 1.0 mV in): > 79 dB.
      Frequency response (ref standard RIAA curve): 20 Hz to 20 kHz +/- 0.35 dB.
      THD (total harmonic distortion, ref 1.0 mV): < 0.008%.
      IMD (intermodulation distortion, SMPTE method: < 0.15 %.
      Crosstalk: < 65 dB.

    • Phono (Moving Magnet; phono in to balanced out):
      Gain (1 kHz, Volume at 0): approximately 40 dB.
      Input impedance: 47k Ohms.
      S/N (signal-to-noise ratio, A-weighted, ref 10.0 mV in, A-weighted): > 96 dB.
      Frequency response (ref standard RIAA curve): 20 Hz to 20 kHz +/- 0.3 .dB.
      THD (total harmonic distortion, ref 10 mV): < 0.001%.
      IMD (intermodulation distortion, SMPTE method: < 0.05%.
      Crosstalk: < 80 dB.

          Input & Output Connections
          • Line level Input: 2 pairs balanced; 4 pairs unbalanced.

          • Home Theater (line level, left, right, sub) Input: 1 set balanced; 1 set unbalanced.

          • Processor Loop (line level) Input: 1 pair unbalanced.

          • Input Impedance (line level) Input: 50k ohms.

          • Phono Input (MM or MC): 1 pair unbalanced.

          • Main Outputs: 1 pair balanced; 1 pair unbalanced
            (Main outputs may be configured as flat or high-pass;
            high-pass is adjustable from 50 Hz to 250 Hz).

          • Subwoofer (left, right, summed) Output: 1 set balanced; 1 set unbalanced
            (Subwoofer outputs may be configured as flat or low-pass;
            low-pass is adjustable from 50 Hz to 250 Hz).

          • Processor Loop (line level) Output: 1 pair unbalanced.

          • Minimum recommended load impedance: 600 ohms.

          • Trigger Input and Output: 1 each.
            IR input and output: 1 each.

          Trim Requirements
          • Gain structure:
            Nominal output level: 0 dBV (1 V).
            Nominal gain (with Volume set to “0”): 1.
            Maximum gain: +12 dB.

          • High-Frequency and Low-Frequency Trims:
            HF trim (settings): -3 dB, -2 dB, -1 dB, Flat, +1 dB, +2 dB, +3 dB @ 12 kHz.
            HF trim (inflection point): 4 kHz.
            LF trim (settings): -3 dB, -2 dB, -1 dB, Flat, +1 dB, +2 dB, +3 dB @ 50 Hz.
            LF trim (inflection point): 200 Hz.

          • Bass Management:
            Crossover slopes (high-pass and low-pass): 12 dB / octave.
            Crossover frequency (high-pass and low-pass): User configurable, 50 Hz to 250 Hz.

            Power Requirements
            Power consumption (On): 32 watts
            Power consumption (Standby): <1 watt
              Dimensions (W x H x D) in inches
              17” wide x 6” high x 16-1/2” deep (unboxed; includes feet and terminals)
              22″ wide x 19″ deep x 10″ high (boxed)
              Weight 
              13.16 kg / 29.0 lbs 

              Customer Reviews

              You recently viewed

              Clear recently viewed