Buy Monitor Audio Mass 5.1 Channel Home Theater Speaker Package at best price in India – Ooberpad
Cart 0

Ooberpad

Monitor Audio Mass 5.1 Channel Home Theater Speaker Package

₹ 99,999.00

Ooberpad brings you premium-grade 5.1 channel home theatre speaker system from Monitor Audio. Monitor Audio Mass 5.1 Channel Home Theater Speaker Package.

Monitor Audio’s compact MASS home cinema system. Its sculpted space-efficient design, packed with technology and easy-installation features, offers jaw-dropping audio dynamics with décor-friendly styling, making the introduction of home cinema sound into any living space a simpler and more satisfying experience.
The compact two-way MASS 10 satellite speaker utilises a 1-inch C-CAM and A 4-inch C-CAM mid-bass driver. The MASS 10 satellite can be wall mounted or used with the dedicated MASS floor-stand.

The W200 is a subwoofer with a potent 220 W DSP controlled Class D amplifier. It powers a side-firing 10" long throw C-CAM bass driver equipped with a huge, dual stack magnet system. Complementing the active driver is a 10" Auxiliary Bass Radiator (ABR). Select ‘music’, ‘movie’ and ‘impact’ pre-set response curves using a back-panel switch
.

Warranty:

1-year manufacturer's warranty

Package includes:

5 nos Monitor Audio Mass 10 Satellite Speakers (Front, Centre & Surround)
1 no Monitor Audio Mass W200 powered subwoofer

Key Features:

  • 4" bass midrange driver featuring C-CAM cone technology.
    • Specially developed 1" C-CAM tweeter design featuring unique venting and rear loading chamber – low resonance design to provide clean, pure sound.
    • Damped polymer moulded cabinet with internal ribbing.
    • The curved shape helps to eliminate un-wanted standing waves.
    • Single point fixing (1/4" UNC) for universal wall bracket installation (not provided).
    • Concealed, discreet cable termination inside end cap using binding post type connection.
    • Single bolt through driver and bracing system, for increased overall bracing and rigidity.
    • Single rear mounted port featuring HiVe® technology for clean, powerful, punchy bass.
    • Black cloth finish with contrasting solid aluminium end caps.
    • Optional floor-stand with internal (pre-wired) cable management system.
    • 10" flat ABR (Auxiliary Bass Radiator)
    • 220watt class-D power amplifier
    • DSP providing accurate filter characteristics
    • Advanced limiters designed to ensure the W200 never loses control.
    • 3 x pre-set bass modes (Music, Movie, Impact)
    • 12 V trigger input – ensures W200 switches on and off with other equipment.
    • Heavy duty MDF construction

        Benefits of Monitor Audio Mass 5.1 Channel Home Theater Speaker Package:

        HiVe II Port Technology


        A new type of port technology which uses a straight rifled design to accelerate air flow and reduce turbulence. HiVe II technology has the ability to move air in and out much quicker than a conventional port, the result is fast powerful bass coupled with superior transient response.

        Gold Dome C-CAM


        The gold dome tweeter is formed from a ceramic-coated aluminium/magnesium alloy, gold anodised to a specific thickness for ideal stiffness and damping characteristics. Its new profile and surround geometry have been developed using advanced modelling tools, to provide the optimum qualities for accurate sound reproduction. The new design moves the first order of breakup to beyond 35kHz, producing a linear response way beyond audibility, which matches the wide frequency bandwidth available from HD music and cinema sound formats. The gold dome is thinner, lighter, more rigid and therefore more efficient than domes made from other materials which are prone to distortion in the audio band.

        C-CAM Drivers
         

        Ceramic-Coated Aluminium/Magnesium is a material originally developed by the aerospace industry for jet engine components. Its properties are ideal for loudspeaker cones being extremely rigid, yet light enough to yield high overall efficiency. In manufacture, aluminium/magnesium alloy undergoes a three-stage stress-relieving process to remove surface deformation and molecular weakness. Once formed, the alloy cone is subjected to a high temperature anodic coating process in which a layer of pure ceramic alumina is depleted onto its surfaces to a depth of 50 microns, producing a completely rigid sandwich of alloy and heat-dissipating ceramic material. Conventional cones are liable to flex or twist in operation, producing a significant level of audible distortion. C-CAM cones have a much higher resistance to bending stress and therefore exhibit much greater fidelity over their entire operating range. C-CAM tweeters and woofers share an audible consistency producing a smooth transition of frequencies and a sense of realism and cohesion in the soundstage.

        Powerful bass reproduction from a compact subwoofer 

        Once the input cables are connected and the controls are set in accordance with the initial set-up procedure above, the MASS W200 can be connected to the mains power supply and switched on at the mains power switch.Do not play any music or movies at this stage as the auto set up of the AV amp (if using one) will need to be run. If your amp has an auto set up procedure, run this now with the volume set to around 10 o’clock. This should be enough for the AV amp to acquire the correct settings. If you do not have an auto set up or are using a stereo amp connected to the left and right inputs, set the crossover in accordance with your main speakers. If using the MASS 10’s this should be around 80Hz, but experimentation is advisable.When the auto set up is complete, check that the subwoofer settings on the AV amp are correct. The crossover frequency should be roughly 80Hz and the level should be no more/ less than +/-3dB. If not I would suggest adjusting accordingly.Now play a variety of music/ film excerpts that you are familiar and adjust the level of the MASS W200 to a point where it integrates with the rest of the system and to where you are happy. The volume of the amp can then be adjusted to an average listening level once you are sure everything is working correctly to double check your sub woofer level settings.

        Where to buy?

        Buy Monitor Audio Mass 5.1 Channel Home Theater Speaker Package online at the best price in Mumbai, Delhi, Bangalore, Hyderabad and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad team. We will help you choose better and give you all the support you need to take the right buying decision in India.

        Technical Specifications of Monitor Audio Mass 5.1 Channel Home Theater Speaker Package:

        Brand & Model # Monitor Audio Mass 5.1 Channel Speaker Package
        Speaker Use Satellite Speaker
        Design
        2-way vented-box system
        Power Handling (RMS) With Amplifier Crossover (100 Hz)

        100 W

        Drive Units

        1 x 4" C-CAM Bass/Mid-range Driver
        1 x 25 mm C-CAM tweeter with vented loading system

        Frequency response 
        80 Hz – 30 kHz
        Crossover frequency

        80 - 120 Hz

        Sensitivity

        84 dB

        Nominal impedance

        8 ohms

        Recommended Amplifier Power

        25 — 100 W


        Power Handling (RMS)

        40 W

        Bass Alignment

        Reflex Rear Ported

        Maximum SPL

        104 dBA

        Dimensions 
        224 x 128 x 128 mm
        813/16 x 51/16 x 51/16"
        Weight

        1.65 kg (3 lb, 10 oz)

         
        Technical Specifications of Monitor Audio Mass W200 Powered Subwoofer: 

        Brand & Model #
        Monitor Audio Mass W200 Subwoofer
        Design
        Powered subwoofer
        System Format
        Active sub-woofer system - Auxilary (ABR) loading. 18 mm MDF cabinet (CARB2 approved)
        Drive Units
        200mm (8in) paper / Kevlar® cone long-throw
        Amplifier Output 220 watts @ 1% THD+N
        Amplifier Classification Class - D amplifier with Switch mode power supply (SMPSU)
        Bass EQ Profiles Music / Movie / Impact
        Lower Frequency Limit 30 Hz (-6 dB)
        Upper Frequency Limit Variable 40 - 120 Hz @ 24 dB/Octave
        Phase Control
        0-180 degrees
        Auto Sensing Line Level >3.5mmV
        Input Level Requirements Standby after approx. 20 minutes if no signal sensed
        Drive Unit Complement
        1 x 10" (250 mm) C-CAM Long Throw Driver
        1 x 10" (260 mm) Auxilary bass radiator
        Input Impedance
        > 20 ohms
        Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60Hz (Factory Region Present)
        Power consumption
        200 watts / 0.5 watts in Standby (ErP approved)
        Connection Stereo RCA in, LFE in, 12v Trigger in (3.5 mono mini-jack)
        Trigger Input 5 12v via 3.5 via mono mini-jack socket
        Dimensions 
        420 x 385 x 385 mm / 169/16 x 163/16 x 163/16"
        Weight
        15.96 kg (35 lb, 2 oz)

        More from this collection