Monitor Audio Platinum PLW215 II Subwoofer
Country of Origin: Uk
Ooberpad announces the availability of the dynamic Monitor Audio Platinum PLW215 II Subwoofer. Just recall your last encounter with the awe-inspiring power of thunder; how its huge natural presence is able to translate the experience of low-frequency sound into a shock wave. The PLW215 II will help you to re-live the air-bending effect of Mother Nature’s own subwoofer within your listening room.
1-year manufacturer's warranty
- Twin 15" C-CAM drivers, triple-suspended for a full 4cm of excursion
- A dedicated DSP-controlled amplifier powers each driver
- SubConnect software: adjust in-room response using top panel dial or laptop
- 4 user presets per input, including preset Flat/Music/Movie/Impact modes
- Night Mode: actively reduces dynamic range of louder sections to desired level
- High current Switch mode power supply (SMPSU)
- 12v trigger in (3.5 mm mono mini-jack, 6v threshold)
- IR remote included, IR receiver on front panel
- 3.5 mm microphone input jack, microphone included
Benefits of Monitor Audio Platinum PLW215 II Subwoofer:
Sound of Nature re-created
Twin 15" C-CAM drivers, triple-suspended for a full 4 cm of excursion and individually powered by DSP-controlled amplifiers deliver clean frequencies down to 16 Hz. At this level, bass arrives with a percussive impact that you feel from head to toe, seamlessly extending even the PL500 II to deliver remarkable audio resolution beyond the limits of your audible range, but with a physical dimension that absorbs the senses. Simply put, it’s the sound of nature, vividly re-created.
Functionally Sophisticated and Natural Sounding Bass
Even so, all this explosive audio potency would be wasted without control. Adjust the in-room response of the PLW215 II on the top panel or via laptop using Monitor Audio's proprietary ‘SubConnect’ software. Within this global setting, the 24bit DSP offers four fully configurable user-presets per input, comprising pre-set modes for Flat/Music/Movie/Impact EQ settings. If you wish to fine-tune, you can adjust frequency, slope, trim and EQ filters for each preset. There’s also a Night Mode, which actively reduces the dynamic range of louder sections according to the level you desire. The PLW215 II is the most powerful, sophisticated and natural-sounding bass engine Monitor Audio has ever built, and so complements the flagship Platinum II range with absolute precision.
Where to buy?
Buy the Monitor Audio Platinum PLW215 II Subwoofer online at the best price in Mumbai, Delhi, Bangalore, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad team. We will help you choose better and give you all the support you need to take the right buying decision in India.
Technical Specifications of Monitor Audio Platinum PLW215 II Subwoofer:
|Brand & Model||Monitor Audio Platinum PLW215 II|
Sealed Cabinet with vibration cancelling driver configuration,
25 mm M.D.F. construction with internal bracing and sealed amplifier compartment
Lower Frequency Limit
-3 dB @ 23 Hz / -10 dB @ 18 Hz (Free Field) default preset: Music, -3 dB @ 19 Hz / -10 dB @ 16 Hz (In Room) default preset: Music, Limited by low frequency protection filter (-3 dB @ 12 Hz)
|Upper Frequency Limit||-3 dB @ 150 Hz|
|Drive Unit Complement
2 x 15" C-CAM sub-woofer drivers featuring inverted surround and triple suspension for increase support at high excursions.
Black single layer edge wound 3" voice coil with vented pole, vented coil and black CED coated motor unit to reduce power compression and increase thermal dissipation.
FEA optimised cone, magnetics and suspensions for optimal performance and increased linearity
|Linear Driver Excursion
42 mm Peak to Peak,
Total displacement 6.4 Litres
Dual Amplifier design with a single amplifier powering each driver,
Combined 1400 W RMS, 2000 W Peak (Burst Ratio 1:4 Continuous,
Measured into two non-reactive 4 Ohm Loads)
||2x Class-D amplifiers, Balanced Differential Input, Differentially loaded Power Supply, DSP controlled. High current Switch mode power supply (SMPSU)|
|User Equalisation (via SubConnect)||
6 fully controllable EQ filters and 6 default filters with gain offset per preset,
Default settings: Flat / Music / Movie / Impact
0-360 degrees, Increments of 15 degrees with a pure invert at 180 degrees
|Audio Input Connection||
LFE Input with Balanced (XLR) and Unbalanced (RCA) inputs, Stereo Input with unbalanced (RCA) inputs. Inputs individually assignable to any Preset
|Power Consumption||Maximum 1200 W, Standby <0.5 W (ErP compliance)|
|Fuse Type||20 mm T12.5AL 250VAC|
External Dimensions (Including Amp, Drivers and Terminals (H x W x D))
500 x 504 x 512.5 mm
(1911/16 x 1913/16 x 203/16")
|External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D))||545.8 x 504 x 512.5 mm (211/2x 1913/16x 202/16")|
|Weight (unpacked)||57.54 kg (126 lb 10 oz)|