Rode VideoMic Pro Rycote Condenser On-Camera Microphone
Check out the impressive Rode VideoMic Pro Rycote Condenser On-Camera Microphone that is now available on Ooberpad. The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio. At the core of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with a remarkably low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is cut down, and your recording is focused on the subject in front of the camera.
1-year manufacturer's warranty
- Rycote® Lyre® shock mounting onboard
- All-new capsule with lower noise and higher sensitivity
- Broadcast recording quality condenser microphone
- Compact form factor (150mm/6” length)
- Ultra lightweight (85g/3oz)
- 9V battery powered - over 70 hours use (alkaline)
- Integrated shock mounting
- Integrated foam windscreen
- 3.5mm stereo mini-jack output (dual mono)
- Two step High Pass Filter (flat, 80Hz)
- Three position level control (-10dB, 0, +20dB)
- Camera shoe mount with 3/8” thread for easy boompole mounting
Benefits of Rode VideoMic Pro Rycote Condenser On-Camera Microphone:
Integrated Rycote Lyre based Shock Mounting System
The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Enjoy Easy Control of Power, Filter and Level
Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response, a selectable high-pass filter at 80Hz is available, which will prevent low-end noise such as air conditioners and traffic from being recorded. Below these controls are the level settings, which cut down or enhance the recorded level as required. The -10dB level attenuation (or PAD) is best-fit for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), efficiently reducing the amount of noise generated by the camera's comparatively low-quality audio circuitry. The microphone uses a standard sized shoe mount for on-camera use and features a 3/8" thread in the base of the mount for easy boom pole mounting. The VideoMic pro is battery powered and packs a punch with over 70 hours of recording from a single 9V battery.
Where to buy:
Buy the Rode VideoMic Pro Rycote Condenser On-Camera Microphone online at the best price in Mumbai, Delhi, Bangalore, Chennai & all across India. Enjoy expert, prompt & courteous customer service from the Ooberpad team. We will help you choose better & give you all the support you need to take the right buying decision in India.
|Brand & Model #||Rode VideoMic Pro Rycote|
||JFET impedance converter|
40Hz - 20kHz (selected HPF @80)
|Maximum Output Level||6.9mV (@ 1kHz, 1% THD into 1KΩ load)|
|Sensitivity||-32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Equivalent Noise Level (A-weighted)||
|Dimensions (H x W x D)||
100 x 75 x 120 mm