SVS PB 3000 Subwoofer

Sold out
₹ 228,000.00


Ooberpad brings to you the SVS PB-3000 Subwoofer — Crushing output and extreme low frequency extension down to 16Hz without sacrificing accuracy and control, the PB-3000 is a standard bearer for bass performance at any price. All new 13-inch high-excursion SVS driver, sophisticated 800 watts RMS, 2,500+ watts peak Sledge STA-800D2 DSP amplifier and first ever dual port SVS cabinet design ensure effortless output at the deepest octaves without a hint of distortion. PB-3000 features two port tuning modes, each with individual response curves to achieve the most accurate in-room frequency response possible whether in sealed or standard mode. With massive output that extends far below the threshold of human hearing, where it can only be felt, the PB-3000 unleashes the full impact of every movie, bassline and low frequency effect without ever compromising
.

Warranty

5-years manufacturer's warranty

Key Features:

  • Protective non-resonant steel mesh grille
    • Front-firing 13 inch high-excursion SVS driver
    • Rear-mounted amplifier with Intelligent Control Interface (ICI)
    • Dual 3.5-inch ports
    • Screw-in rubber feet
    • Robust Medium Density Fiberboard (MDF) cabinet construction

        Benefits of SVS PB-3000 Subwoofer: 

        All New First Ever 13-inch High-Excursion SVS Driver – Iron Fist Inside a Velvet Glove.

        Completely new 13-inch high-excursion SVS driver delivers punishing levels of low frequency output, while maintaining crisp speed in transients by stopping and starting on a dime with precision. An aluminum vented cone with exceptional stiffness to mass ratio and a proprietary injection molded extreme-excursion surround ensure flawless pistonic motion for pinpoint control and accuracy.

        Flat edge wound split-wind voice coil within the motor assembly provides effortless, on-demand power at high excursion, while reducing mass and improving overall driver efficiency. The result is room-shaking output with amazingly precise response when the music, movie or other content demands it most.

        Dual ferrite magnet motor assembly weighing nearly 25lbs generates massive amounts of current to produce extreme driver excursion with precise control for the deepest, most accurate and authoritative bass possible from a 13-inch driver.

        Lightweight and rigid aluminum vented cone with composite fiber dustcap generates massive output with pinpoint accurate frequency response.

        Long-throw parabolic surround and proprietary injection molded gasket ensure longevity and allow extreme excursion for room-energizing bass.

        Sledge STA-800D2 Amplifier – Massive Power with Precise Control.

        Conservatively rated at 800 watts RMS, 2,500+ watts peak power, the Sledge STA-800D2 amplifier maximizes the full potential of the 13-inch driver with effortless power and absolute control. The innovative design combines the efficiency of a Class D amplifier with the ability to move colossal amounts of current through the fully discrete MOSFETs for outstanding real-world subwoofer performance at all drive levels.

        High Current Output of Fully Discrete MOSFETs with Efficiency of Class D Amplifier allows the Sledge STA-800D2 amplifier to move massive amounts of current through the fully discrete MOSFETs enabling immense output with surgical precision.

        Sophisticated 50Mhz High Resolution Analog Devices Audio DSP is the most advanced digital processor ever used in a subwoofer and maintains pinpoint accuracy and pristine sound quality through advanced in-room tuning, optimized frequency response curves, powerful DSP controls and more.

        New Rear Panel Intelligent Control Interface (ICI).

        Completely new 13-inch SVS driver delivers punishing levels of low frequency output, while maintaining crisp speed in transients by stopping and starting on a dime with pinpoint precision. An aluminum vented cone with exceptional stiffness to mass ratio and a proprietary injection molded extreme-excursion surround ensure flawless pistonic motion for pinpoint control and accuracy.

        Flat edge wound split-wind voice coil within the motor assembly provides effortless, on-demand power at the highest excursion levels, while reducing mass and improving overall driver efficiency. The result is room-shaking output with amazingly precise response when the music, movie or other content demands it most.
        Dual ferrite magnet motor assembly weighing nearly 25lbs generates massive amounts of current to produce extreme driver excursion with precise control for the deepest, most accurate and authoritative bass possible from a 13-inch driver.

        Lightweight and rigid aluminum vented cone with composite fiber dustcap generates massive output with pinpoint accurate frequency response.

        Long-throw parabolic surround and proprietary injection molded gasket ensure longevity and allow extreme excursion for room-energizing bass.

        First Ever SVS Dual Port Cabinet Design – Maximized Airflow without Distortion.

        PB-3000 is the first SVS subwoofer optimized with a dual port cabinet design for maximizing airflow, driver motion and amplifier power, while eliminating potential for port turbulence. Foam port plugs come standard with the PB-3000 and allow for variable port tuning. Each response curve for the two port tuning modes (standard and sealed), is fully configured to the respective mode to achieve balanced and accurate low frequency response.

        Where to buy?

        Buy the SVS PB-3000 Subwoofer online at the best price in Mumbai, Delhi, Bangalore, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad team. We will help you choose better and give you all the support you need to take the right buying decision in India.

        Technical Specifications of SVS PB-3000 Subwoofer:

        Brand & Model # SVS PB-3000 Subwoofer
        Frequency Response / Acoustic Data
        • 16-260 Hz +/- 3 dB (standard mode)
        • 18-260 Hz +/- 3 dB (sealed mode)
        • Roll-off slope specifically optimized to take maximum advantage of available room gain
        • 2-meter ground plane away from reflective structures (quasi-anechoic)
        Subwoofer Specs
        • Premium Black Ash
        • Protective non-resonant steel mesh grille
        • Front-firing 13 inch high-excursion SVS driver
        • Rear-mounted amplifier with Intelligent Control Interface (ICI)
        • Dual 3.5-inch ports
        • Screw-in rubber feet
        • Robust Medium Density Fiberboard (MDF) cabinet construction
        • Dimensions (w/ grille): 21.9” (557mm) H X 18.3” (465mm) W X 26” (660mm) D
        • Dimensions (without grille): 21.9” (557mm) H X 18.3” (465mm) W X 23.5” (596mm) D
        • Shipped Dimensions: 31.3” (795mm) H 23.1” (587mm) W X 26.5” (674mm) D
        • Weight (unboxed): 82.2 lbs. (37.3 kg)
        • Shipped Weight: 97 lbs. (44 kg)
        Driver Specs
        • All New Proprietary 13” high-excursion SVS 3000 Series subwoofer driver
        • SVS first flat edge wound split-wind voice coil provides maximum magnetics at high excursion while reducing mass and improving overall driver efficiency. Built around a premium grade 2” polyimide impregnated fiberglass former for maximum thermal conductivity.
        • Two massive, dedicated toroidal ferrite magnets generate unparalleled levels of magnetic force to drive the highest levels of excursion, SPL, and start/go power for the deepest and most authoritative bass possible.
        • All-new High density FEA-optimized cast aluminum basket provides unequaled levels of rigidity, tensile strength, and energy transference available from a subwoofer.
        • Four balanced 24-strand silver plated Litz wire high temperature leads woven through the 6.5” 2-ply Nomex composite spider provide a pristine electrical connection from the amplifier to the voice coil.
        • All new 13” 1050 Aluminum vented cone ensures a light, rigid, and neutral radiating surface.
        • Precision machined motor elements and narrow tolerance suspension parts produce unmatched linearity at full excursion for exceptionally tight and fast output, even at reference volumes.
        • Extreme oversized low carbon vented 1008 steel U-yoke and top plate provide superior cooling and improved magnetics for maximum performance and efficiency.
        • 6063 Aluminum shorting sleeve reduces gap induction and distortion, enhances thermal conductivity, and improve magnetic linearity.
        • Nickle-plated high-tension spring terminals.
        • Proprietary injection molded gasket and SBR extreme-excursion surround maintains ideal pistonic motion for pinpoint accuracy and control.
        Amplifier Specs
        • Massively powerful Sledge 800-watt continuous Class D design with 2,500+ watts of Peak Power.
        • High efficiency cool-running Class-D switching topology with massive 25 Amp 600 Volt MOSFET’s result in lower EMI and highest efficiency while providing effortless power to produce SPLs and low frequency output with pristine clarity well beyond reference listening levels.
        • High resolution 50Mhz Analog Devices Audio DSP with double precision 56bit filtering is the most advanced subwoofer processor available for perfect audio reproduction.
        • Unmatched intelligence from user adjustable low pass, phase, polarity and room gain compensation with three parametric EQs for absolute best alignment with speakers and optimized performance in any room.
        • Groundbreaking SVS Bluetooth DSP control app for iOS and Android devices with three user presets allow custom tuning for every room and system.
        • RCA stereo input/output with ultra-wide input voltage for consumer and professional audio applications.
        • All new rear panel Intelligent Control Interfacel (ICI) user interface with bright back-lit controls.
        • Auto/On and 3-30V AC/DC trigger for Maximum Installation Convenience.
        • Input impedance 16kohm (unbalanced RCA).
        • Green 0.5-watt low standby power consumption.
        • RoHS compliant, lead-free construction, world-wide safety certifications.
        SVS App Specs
        • The most powerful and flexible Bluetooth controlled subwoofer DSP app, works with both iOS and Android operating systems.
        • Easiest and most convenient way to adjust crossover frequencies, parametric EQ, polarity, room gain and all other bass management functions.
        • Three convenient custom presets allow for perfect tuning in any room or system, from your favorite seat.
        • Single tap adjustment for controlling variable port tuning with standard and sealed modes.
        • Unique bidirectional feedback shows adjustments in real time on both app and subwoofer interface.
        • Easy-to-follow tutorial provides clear guidance for all functions.

        You recently viewed

        Clear recently viewed