Tannoy Revolution XT C Center Channel Speaker (Single)
A compact, but powerful and detailed centre speaker, the Tannoy Revolution XT C Center Channel Speaker.
Turn your Revolution XT series loudspeakers into a surround system for movies and multi-channel music with the Tannoy Revolution XT C Center Channel Speaker . Designed as a center channel loudspeaker ideal for dialogue and centre-stage vocal reproduction, the XT C features the compact 100mm (4.00”) Omnimagnet Dual Concentric driver from the XT Mini for supremely articulate presentation in any room. The Omnimagnet dual is augmented with twin 100mm (4.00”) mid/bass drivers to deliver deep bass reproduction down to 62Hz, bringing authentic presence to movie dialogue. The Omnimagnet dual is augmented with twin 100 mm (4 inch) mid/bass drivers to deliver deep bass reproduction down to 62 Hz, bringing authentic presence to movie dialogue.
The compact 7.6 litre XT C cabinet utilises the low colouration trapezoid shape that defines the Revolution range, with extensive bracing to further enhance accuracy across the audio band. A unique variation on the XT-series plinth has been designed specifically for the XT C, allowing the speaker to be angled low, mid or high depending on its placement relative to the listener. The three-point contact with the speaker provides stable support whether the XT C is placed below or above a TV screen or directly behind an acoustically transparent projection screen.
Warranty
1-year manufacturer's warranty
Key Features & Benefits of Tannoy Revolution XT C Center Channel Speaker:
Dual Concentric Driver
The Tannoy Revolution XT C utilises a 100 mm (4”) multi-fibre paper cone with 20 mm (0.79") Linear PEI dome tweeter with Torus Ogive WaveGuide and Omnimagnet technology.
High Grade Cabinet
The highest attention to detail means artisan-quality veneering and the XT C is available in the highly attractive medium oak or dark walnut real wood veneer finish options.
Integrated Plinth
A unique variation on the XT-series plinth has been designed specifically for the XT C, allowing the speaker to be angled low, mid or high depending on its placement relative to the listener. The three-point contact with the speaker provides stable support.
Quality Build
The 7.6 litre cabinet is of heavy construction with extensive bracing to ensure exceptionally low colouration. At the rear are high grade terminals and the speakers is supplied with a magnetic fixing grille.
Where to buy:Technical Specifications of Tannoy Revolution XT C Speaker:
| Brand & Model | Tannoy Revolution XT C Speaker |
| PERFORMANCE | |
|
Recommended amplifier power (Watts RMS) |
25 - 120 |
| Continuous power handling (Watts RMS) | 60 |
| Peak power handling (Watts) | 240 |
| Sensitivity (2.83 Volts @ 1m) | 89 dB |
| Nominal Impedance (Ohms) | 8 |
| Frequency response (-6 dB) | 62 Hz - 52 kHz |
| DRIVE UNIT | |
| High frequency | 20 mm (0.79") Linear PEI dome with Torus Ogive WaveGuide and Omnimagnet technology |
| Low frequency | 100 mm (4”) multi-fibre paper 35 mm (1.38”) voice coil |
| CROSSOVER | |
| Crossover Frequency | 2.8 kHz |
| Crossover Type | Passive low loss 2nd order low pass, 1st order high pass |
| CONSTRUCTION | |
| Enclosure type | Rear ported reflex |
| Volume | 7.6 l (0.27 cu. ft.) |
| Dimensions (H x W x D) (inc plinth) |
176.9 x 450 x 205.6 mm |
| Net weight | 7.9 kg (17.5 lbs) |
