Totem Acoustic Wind Design Floorstanding Speaker (Pair)

₹ 1,959,900.00

Check Cash on Delivery Availability for Orders under Rs 30,000/-

No Cost EMI: Avail No Cost EMI on Bajaj Finserve and select Credit Cards for orders above ₹3000 Details

EMI Guide


EMI for Rs.

Below EMI options can be availed while making payment. To avail EMI continue to check out and chose the Credit Card option for payment.

Did you check out the dynamic Totem Acoustic Wind Design Floorstanding Speaker? It is now available on Ooberpad. Going a step further than the original Wind Floorstanding, the Wind Design is refined to the highest sonic tolerances. With its hand-selected drivers and exclusive crossover components, the Wind Design offers ultra-broad all-axis sound staging performance. Precision-designed like a musical instrument, the Wind Design packs a punch with sonic expressivity to the absolute, pulling you inside the music.

Dressed for the unmatched musical renditions, the Wind Design’s six-layer multicoated finishes results in additional structural rigidity. The deep lustre finish not only adds shine but also facilitates a more cohesive acoustic behaviour. At the base of the front baffle is a new articulating claw that is adjustable for slanting back the baffle for precise spatial alignment. The rear skid-plate decoupling system enables additional spatial performance.


2-year manufacturer's warranty

Key Features:

  • Avant-garde design
  • Superior sonic architecture
  • Complex cabinet geometry
  • Absolute surreal holographic imaging
  • Design 6-layer multicoated polyester design finishes
  • Exclusive (4x) driver 3-way speaker system
  • On- and off-axis point source imaging
  • Specially damped, long-throw woofer
  • Special low resonance tweeter with chamber
  • Multiple midranges
  • Extreme-quality hard-wired crossover

      Benefits of Totem Acoustic Wind Design Floorstanding Speaker:

      Customized Drivers - Bespoke Acoustic Engineering
      Customized Drivers - Bespoke Acoustic Engineering

      Every single driver is completely unique to Totem and proprietary in design, engineered by Totem and then manufactured to the strictest standards to meet our parameters by the finest raw driver suppliers in the world. In some cases, where the technology is beyond the capabilities of suppliers or is wished to be well-guarded secret, Totem can and will build their own drivers. Every driver exhibits phase linearity, speed, emotion, off-axis natural presentation, and spatial articulation.

      Handmade Crossovers with Point-to-Point Connections

      Totem crossovers don’t need several parts because of the synergy between their customized drivers, but the components are truly best in class. The crossovers aren’t built on PCB’s because the laminated conductive tracks are weak and inconsistent.  On the contrary, they are secured to a thin piece of fiberboard or insulated polymers and components are mechanically crimped together because it simply notches better. In case of any soldering, Totem chooses WBT Silver Solder, the purest in the industry.

      Artisanal Cabinet Construction

      Carefully handcrafted for peak performance that withstands rigours of decades. Lock-Miter assembly is an intricate woodworking procedure where edges physically interlock together. The resulting cabinet is up to 5 times stronger than conventional V Groove cabinets. Internal and external veneering resists warping, structurally fortifies, and ensures consistent peak performance. Industry unique Borosilicate damping manages dissipation, keeps the cabinet musically alive, and never deteriorates. Popular materials like poly fillers eventually decay, dramatically affecting the performance. Variable Density Fiberboard is denser at the extremities than the interior to reduce repetitive nodes and resonances.

      Connectors - WBT Bi-Wire / Bi-Amp

      Premium WBT connectors are the preferred choice by all audiophiles. WBT connectors let the signal through without interfering or affecting it. Superior connectors like WBT connectors will prevent any signal loss and get the most out of the entire system.

      Sound Isolation - Articulated Claw and Skid Plate

      The ultimate in decoupling and honing Totem speakers. This unique claw can be adjusted to modify the angle of the cabinet for optimal bass loading, phase/space articulation, and fine-tuning the relationship between the speaker and environment. An aluminum plate including two formed feet at the base of the speaker cuts out resonances between the floor and speaker enclosure, perfecting bass response and soundstage dimensions.

      Where to buy?
      Buy Totem Acoustic Wind Design Floorstanding Speaker (Pair) online at the best price in Mumbai, Delhi, Bangalore, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the team. We will help you choose better and give you all the support you need to take the right buying decision in India.

      Technical Specifications of Totem Wind Design Floorstanding Speaker:

      Brand & Model # Totem Wind Design
      Frequency Response
      24 Hz – 21 kHz ± 3 dB (in room)
      Recommended Power
      80 – 250 W
      Woofer 8.5″ / 21.59 cm cast frame, specially damped.
      Midrange 2×5.5″ with 3″ / 7.62 cm voice coil. Cast frame. High power handling, wrap around neo magnet structure, accurate linear throw
      Tweeter 1″ / 2.54 cm alloy dome flexible linear suspension, low resonance, chamber

      4 ohms 

      Sensitivity   87 dB
      Dimensions (w x h x d)

      10.7″ x 44.3″ x 14″ / 27.18 x 112.522 x 35.56 cm (over max. size)

      Placement from rear wall
      3′ – 7′ / 91.44 – 213.36 cm
      Placement distance apart
      6′ – 14′ / 182.88 – 426.72 cm
      Break-in Time
      200 – 250 hours
      Crossover Frequency
      Woofer to mids, 2nd order / 2nd order, mids to tweets 2nd order 2nd order
      Speaker Terminals Bi-wireable, Gold WBT connectors
      74.8lb / 34kg

      Customer Reviews

      You recently viewed

      Clear recently viewed