Parasound NewClassic 2125 v.2 Two Channel Power Amplifier - Ooberpad
Parasound NewClassic 2125 v.2 Two Channel Power Amplifier
    Parasound NewClassic 2125 v.2 Two Channel Power Amplifier - Ooberpad
    Parasound NewClassic 2125 v.2 Two Channel Power Amplifier
Parasound NewClassic 2125 v.2 Two Channel Power Amplifier - Ooberpad
Parasound NewClassic 2125 v.2 Two Channel Power Amplifier
Parasound NewClassic 2125 v.2 Two Channel Power Amplifier - Ooberpad
Parasound NewClassic 2125 v.2 Two Channel Power Amplifier
    Parasound NewClassic 2125 v.2 Two Channel Power Amplifier - Ooberpad
    Parasound NewClassic 2125 v.2 Two Channel Power Amplifier
Parasound NewClassic 2125 v.2 Two Channel Power Amplifier - Ooberpad
Parasound NewClassic 2125 v.2 Two Channel Power Amplifier

About

Description

From the house of Ooberpad arrives the high-utility Parasound NewClassic 2125 v.2 Two-Channel Power Amplifier. Parasound's NewClassic Model 2125 v.2 is one of the company's most top-selling two-channel power amplifier. Its unbeatable combination of power, dynamic features, sturdy build quality and cost-efficient make it a must for all but the most demanding systems. And the THX Ultra2 certification means that it meets the most stringent performance standards for convincing reproduction of movie soundtracks.

Warranty 

1-year manufacturer's warranty

Key Features:

  • THX Ultra2 certified
  • 150 watts x 2 into 8 Ω (all channels driven)
  • 225 watts x 2 into 4 Ω or 2 Ω (all channels driven)
  • 400 watts x 1 bridged into 8 Ω or 4 Ω
  • 35 amps peak current per channel
  • 2 Ohm stable operation with load selector switch
  • Two pairs of speaker outputs with front panel A/B buttons
  • Rear-mounted lockout switch disables front A/B buttons
  • High pass filter, switchable for 20Hz or 40Hz
  • Automatic on/off by DC trigger with looping output
  • Automatic on/off by audio signal with 2 sensitivity settings
  • Fully discrete circuitry with high current toroid transformer
  • Bridging switch for stereo or mono operation
  • Efficient, low heat design
  • DC Servo and relay protection circuits
  • Rear-mounted left and right gain controls
  • Standby, channel status and high temperature indicators
  • Gold-plated RCA input jacks
  • Heavy duty 24k gold-plated 5-way speaker terminals
  • 115/230v selector on rear panel
  • 2U rack mount kit available separately (Model RMK22)

Benefits of Parasound NewClassic 2125 v.2 Two Channel Power Amplifier:

Revamped v.2 Features
Revamped v.2 Features

The new v.2 version is well-equipped with a host of new features for enhanced performance and convenience. First is a new A/B speaker button lockout switch on the rear panel. When this switch is set to Lockout, the front panel A and B buttons are disabled and speakers A and B will always be on. This can be particularly useful for a professional audio installer who never intends for the client to use the front panel buttons. The new ultra-sensitive two-position audio trigger allowed Parasound to eliminate the audio trigger sensitivity knob. A 'Quieter' setting will automatically turn on the amp at a very low volume. If this isn't sensitive enough for your system needs, you can also use the 'Louder' setting. 

The 12-volt trigger jacks change from 2.5mm to 3.5mm. The standard for 12-volt triggers in the audio world has become the 3.5mm size and all new Parasound products will change to use this larger size. Here's one more recalibration to the rear panel. The ground lift switch has been eliminated. Alterations to the internal grounding of the amps make this switch redundant. To conserve energy and meet Energy Star and EU power consumption requirement NewClassic amps only need 0.5 watts in standby.  

Updated front and rear cosmetics give the v.2 amps a contemporary look. The front panel has been updated with rounded corners, a new display lens, and updated silk screening. The rear panel has updated silk screening making it effortlessly easy to read and comprehend the functions. There's also a power specification increase. The original versions of the NewClassic amps were underrated. With the v.2 amps, Parasound has altered the specification to get it in sync with the actual capability of each amp. There is an average rating increase of 10-15%. Both version 1 and v.2 amps have the same power and there are no changes to the audio circuits.


Where to buy?
Buy Parasound NewClassic 2125 v.2 Two Channel Power Amplifier online at the best price in Mumbai, Delhi, Bangalore, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad.com team. We will help you choose better and will give you all the support you need to take the right buying decision in India.

Technical Specifications of Parasound NewClassic 2125 v.2 Two Channel Power Amplifier:

Brand & Model # Parasound NewClassic 2125 v.2
All Channels Driven 150 watts x 2, 8Ω 
225 watts x 2, 4Ω 
225 watts x 2, 2Ω (Load switch set to 2-3Ω)
Bridged Mono
400 watts x 1, 8Ω 
400 watts x 1, 4Ω (Load switch set to 2-3Ω)
Current Capacity 35 amps peak per channel
Frequency Response
20 Hz - 50 kHz, +0/-3 dB, 1 watt 
Dynamic Headroom - 1.3 dB
Total Harmonic Distortion (THD)
0.25% at full rated output 
0.015% at average listening levels
IM Distortion 0.05 % 
Transient IM Distortion Not measurable
S/N Ratio  114 dB at rated output, IHF A-weighted 
106 dB at rated output, unweighted 
93 dB at 2.828 V output, IHF A-weighted 
84 dB at 2.828 V output, unweighted
Input Impedance  33 k Ω
Input Sensitivity 1 V in for 28.28 V out, THX standard
Inter-Channel Crosstalk  85 dB @1 kHz, 73 dB @10 kHz, 67 dB @ 20kHz
Damping Factor - Over 150 at 20Hz 
12V Trigger Turn On - DC 9 – 12V, 15 mA
Audio Turn On  Quieter: 1 mV 
Louder: 6 mV
AC Power Requirement 110 - 120 V / 220 -240 V, 50 - 60 Hz 
0.5 watts standby 
32 watts Idle (no audio) 
550 watts full output
Dimensions
171/4" Wide 
16" Deep, with cables connected 
4.25" High with feet, 3.5" panel only (2U) 
(437 x 406 x 107mm, 88.2 mm panel only)
Net Weight
27 lbs (12.3 kg)
Description

From the house of Ooberpad arrives the high-utility Parasound NewClassic 2125 v.2 Two-Channel Power Amplifier. Parasound's NewClassic Model 2125 v.2 is one of the company's most top-selling two-channel power amplifier. Its unbeatable combination of power, dynamic features, sturdy build quality and cost-efficient make it a must for all but the most demanding systems. And the THX Ultra2 certification means that it meets the most stringent performance standards for convincing reproduction of movie soundtracks.

Warranty 

1-year manufacturer's warranty

Key Features:

  • THX Ultra2 certified
  • 150 watts x 2 into 8 Ω (all channels driven)
  • 225 watts x 2 into 4 Ω or 2 Ω (all channels driven)
  • 400 watts x 1 bridged into 8 Ω or 4 Ω
  • 35 amps peak current per channel
  • 2 Ohm stable operation with load selector switch
  • Two pairs of speaker outputs with front panel A/B buttons
  • Rear-mounted lockout switch disables front A/B buttons
  • High pass filter, switchable for 20Hz or 40Hz
  • Automatic on/off by DC trigger with looping output
  • Automatic on/off by audio signal with 2 sensitivity settings
  • Fully discrete circuitry with high current toroid transformer
  • Bridging switch for stereo or mono operation
  • Efficient, low heat design
  • DC Servo and relay protection circuits
  • Rear-mounted left and right gain controls
  • Standby, channel status and high temperature indicators
  • Gold-plated RCA input jacks
  • Heavy duty 24k gold-plated 5-way speaker terminals
  • 115/230v selector on rear panel
  • 2U rack mount kit available separately (Model RMK22)

Benefits of Parasound NewClassic 2125 v.2 Two Channel Power Amplifier:

Revamped v.2 Features
Revamped v.2 Features

The new v.2 version is well-equipped with a host of new features for enhanced performance and convenience. First is a new A/B speaker button lockout switch on the rear panel. When this switch is set to Lockout, the front panel A and B buttons are disabled and speakers A and B will always be on. This can be particularly useful for a professional audio installer who never intends for the client to use the front panel buttons. The new ultra-sensitive two-position audio trigger allowed Parasound to eliminate the audio trigger sensitivity knob. A 'Quieter' setting will automatically turn on the amp at a very low volume. If this isn't sensitive enough for your system needs, you can also use the 'Louder' setting. 

The 12-volt trigger jacks change from 2.5mm to 3.5mm. The standard for 12-volt triggers in the audio world has become the 3.5mm size and all new Parasound products will change to use this larger size. Here's one more recalibration to the rear panel. The ground lift switch has been eliminated. Alterations to the internal grounding of the amps make this switch redundant. To conserve energy and meet Energy Star and EU power consumption requirement NewClassic amps only need 0.5 watts in standby.  

Updated front and rear cosmetics give the v.2 amps a contemporary look. The front panel has been updated with rounded corners, a new display lens, and updated silk screening. The rear panel has updated silk screening making it effortlessly easy to read and comprehend the functions. There's also a power specification increase. The original versions of the NewClassic amps were underrated. With the v.2 amps, Parasound has altered the specification to get it in sync with the actual capability of each amp. There is an average rating increase of 10-15%. Both version 1 and v.2 amps have the same power and there are no changes to the audio circuits.


Where to buy?
Buy Parasound NewClassic 2125 v.2 Two Channel Power Amplifier online at the best price in Mumbai, Delhi, Bangalore, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad.com team. We will help you choose better and will give you all the support you need to take the right buying decision in India.

Technical Specifications of Parasound NewClassic 2125 v.2 Two Channel Power Amplifier:

Brand & Model # Parasound NewClassic 2125 v.2
All Channels Driven 150 watts x 2, 8Ω 
225 watts x 2, 4Ω 
225 watts x 2, 2Ω (Load switch set to 2-3Ω)
Bridged Mono
400 watts x 1, 8Ω 
400 watts x 1, 4Ω (Load switch set to 2-3Ω)
Current Capacity 35 amps peak per channel
Frequency Response
20 Hz - 50 kHz, +0/-3 dB, 1 watt 
Dynamic Headroom - 1.3 dB
Total Harmonic Distortion (THD)
0.25% at full rated output 
0.015% at average listening levels
IM Distortion 0.05 % 
Transient IM Distortion Not measurable
S/N Ratio  114 dB at rated output, IHF A-weighted 
106 dB at rated output, unweighted 
93 dB at 2.828 V output, IHF A-weighted 
84 dB at 2.828 V output, unweighted
Input Impedance  33 k Ω
Input Sensitivity 1 V in for 28.28 V out, THX standard
Inter-Channel Crosstalk  85 dB @1 kHz, 73 dB @10 kHz, 67 dB @ 20kHz
Damping Factor - Over 150 at 20Hz 
12V Trigger Turn On - DC 9 – 12V, 15 mA
Audio Turn On  Quieter: 1 mV 
Louder: 6 mV
AC Power Requirement 110 - 120 V / 220 -240 V, 50 - 60 Hz 
0.5 watts standby 
32 watts Idle (no audio) 
550 watts full output
Dimensions
171/4" Wide 
16" Deep, with cables connected 
4.25" High with feet, 3.5" panel only (2U) 
(437 x 406 x 107mm, 88.2 mm panel only)
Net Weight
27 lbs (12.3 kg)
Parasound by Parasound

Parasound NewClassic 2125 v.2 Two Channel Power Amplifier

Need a Custom Designed Solution ?

Get in Touch

Country of Origin: Usa

Check Out These Related Products