Q Acoustics Concept 500 Floorstanding Speaker (Pair)- Black Rosewood

₹ 459,900.00

Ooberpad brings you the Q Acoustics Concept 500 Floorstanding Speaker. Designed to appeal to discerning audiophiles, the Concept 500 achieves a perfect balance between art and science. It is a loudspeaker that is at once, stylish, contemporary, fine-sounding and astonishingly accurate. It couples low directivity with wide bandwidth, good sensitivity and sensible impedance. This makes the new Concept 500 both room-friendly and an easy load to drive, allowing amplifiers to deliver their best performance.

To create a stereo soundstage which gives as good an impression of width, depth and height as that found in a live performance requires high quality drive units, a well designed crossover and an accurately constructed cabinet. To achieve this, Q Acoustics formed a truly talented team with many years of experience in the design, engineering and manufacture of world-class loudspeakers. A combination that resulted in a state-of-the-art loudspeaker worthy of any high-end system.


1-year manufacturer's warranty

Key Features:

  • Finish
  • Crossover
  • P2P Cabinet Bracing
  • Gelcore Cabinet Walls
  • Terminals and Rear Access Panel
  • High Frequency Driver
  • Mid/Bass Drivers
  • HPE Pressure Equalisers
  • Cabinet Plinth

Benefits of Q Acoustics Concept 500 Floorstanding Speaker (Pair): 


Great care has been taken in both the design of the crossover and the selection of high grade components, to introduce virtually zero noise and distortion. The 4th order Linkwitz-Riley topology which gives an excellent response both on and off-axis.

P2P Cabinet Bracing

A method known as P2P (Point to Point) bracing, supports the parts of the cabinet that need to be stiffened to deal with low frequency panel vibrations.

Gelcore Cabinet Walls

Constructed in three separate layers and filled under pressure with a non-setting gel, this damps the cabinet walls and converts higher-frequency vibrations into heat.

Terminals and Rear Access Panel

The rear access panel has been constructed to maintain the integrity of the Dual Gelcore cabinet. The Concept 500 is equipped for bi-wiring or bi-amping with terminals which can accept bare wires, spades or 4mm banana plugs.

High Frequency Driver

Mechanically decoupled mounting which effectively isolates the HF driver and speaker cabinet from reciprocal vibrations that would otherwise be transmitted between them.

HPE Pressure Equaliser

Tall loudspeakers tend to suffer from resonances caused by un wanting pressure gradients. Specifically designed Helmholtz Pressure Equalisers *HPE) balance out these pressure irregularities.

Cabinet Plinth 

The cast aluminium base of the Concept 500 is designed without large flat areas or additional adornments to discourage unwanted acoustic reflections. The resulting elegant design is underpinned with a choice of carefully engineered feet to immovably couple the loudspeaker to any surface.
Where to buy:
Buy Q Acoustics Concept 500 Floorstanding Speaker (Pair) online at the best price in Mumbai, Delhi, Bangalore, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad team. We will help you choose better and give you all the support you need to take the right buying decision in India.

Technical Specifications of Q Acoustics Concept 500 Floorstanding Speaker:

Brand & Model # Q Acoustics Concept 500 Floorstanding Speaker
Frequency Response
41 Hz – 30 kHz +3/-6 dB
Average Impedance
6 Ω
Minimum Impedance
3.7 Ω
Recommended Power
25 - 200 W
90 dB for 2.83 Volts
<0.2 % (120 Hz – 20 kHz)
Crossover Frequency
2.5 kHz
Mid Bass / Driver
2 x 165 mm (2 x 6.5”)
High Frequency Unit
28 mm (1.10”)
Overall Size (W x H x D)
400 x 1150 x 350 mm (15.74” x 45.27” x 13.77”)
Cabinet Width
200 mm (7.90”)
42 kg per cabinet (92 lbs)
High Frequency Level
+ or - 0.5 dB above crossover

You recently viewed

Clear recently viewed