This newest version of the McIntosh C22 Vacuum Tube Preamplifier – the Mk V – is the direct replacement to the highly regarded C70 Limited Edition 70th Anniversary Vacuum Tube Preamplifier, which commemorated McIntosh's 70th Anniversary that took place in 2019. The new C22 Mk V is the latest McIntosh vacuum tube preamplifier to carry the cherished C22 model number. It has all the performance of the acclaimed C70 but with the hallowed C22 moniker and its signature glass and aluminum front panel design.

Warranty

3-year manufacturer's warranty

Key Features:

• All analog design and a retro look
• (5) 12AX7A and (1) 12AT7 vacuum tubes
• Moving Coil and Moving Magnet phono inputs

Benefits of McIntosh C22 2-Channel Vacuum Tube Preamplifier Mk V:

All analog design and a retro look

The C22 Mk V uses one 12AT7 and five 12AX7A vacuum tubes which can be seen through a glass panel located on the top of the preamp. Knobs and rocker switches operate all control functions while modern LED lights indicate input selection and volume level. The C22 Mk V has two balanced inputs, three unbalanced inputs, one Moving Coil and one Moving Magnet phono inputs, for a total of seven inputs. There are two pairs each of balanced and unbalanced output connections; the two outputs allow sending signals to two separate power amplifiers.

McIntosh Headphone Crossfeed Director (HXD®) technology

Bypassable bass and treble tone controls are located on the front panel and can be adjusted in 2dB increments via rotary knobs. Impedance and capacitance for the phono inputs can also be adjusted via separate rotary knobs. In addition to setting the listening level, the volume knob can also be used to adjust the relative volume balance between the left and right audio channels. The ¼” headphone jack is powered by the High Drive headphone amplifier and features the McIntosh Headphone Crossfeed Director (HXD^®) technology. HXD improves the sound localization for headphone listening by restoring the directionality component of the sound stage that's normally only heard from loudspeakers.

Power control technology 

Our Power Control technology is included with four ports that can automatically turn other connected McIntosh components such as amplifiers, CD players or turntables, on and off. Data ports are also present and can control basic functions of connected McIntosh source components via the included remote control.

Stunning design

The C22 Mk V sits atop a stunning polished stainless steel chassis and features the timeless McIntosh illuminated logo, control knobs, and aluminum end caps. With its retro black glass and aluminum front panel design, the C22 Mk V will fit right in with McIntosh home audio systems of any era – from the 1950s to current day.
 

Where to buy?
Buy the McIntosh C22 2-Channel Vacuum Tube Preamplifier Mk V online at the best price in Mumbai, Delhi, Bangalore, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad team. We will help you choose better and give you all the support you need to take the right buying decision in India.

Technical Specifications of McIntosh C22 2-Channel Vacuum Tube Preamplifier Mk V:

Brand & Model #	McIntosh C22 Mk V
Electronic Specifications	Number of Channels: 2 Total Harmonic Distortion: High Level: 0.08% Frequency Response: +0, -0.5dB from 20Hz to 20kHz +0, -3dB from 15Hz to 100kHz Maximum Volts Out (Balanced / Unbalanced): 16V RMS / 8V RMS Sensitivity High Level (Balanced / Unbalanced): 900mV / 450mV Sensitivity Phono (Moving Coil): 0.45mV Sensitivity Phono (Moving Magnet): 4.5mV Signal To Noise Ratio (High Level): 100dB Signal To Noise Ratio (Moving Coil): 75dB Signal To Noise Ratio (Moving Magnet): 75dB Voltage Gain (High Level): 15dB Voltage Gain (Moving Coil): 60db Voltage Gain (Moving Magnet): 40dB Input Impedance (Balanced / Unbalanced): 44K ohms, 25K ohms
Connectivity	Balanced Input: 2 Unbalanced Input: 3 Phono Input Moving Coil: 1 (adjustable) Phono Input Moving Magnet: 1 (adjustable) Upgradeable Digital Audio Module: No Digital Coaxial Input: 0 Digital Optical Input: 0 Digital MCT (DIN) Input: 0 Digital USB Input: 0 HDMI (ARC) Input: 0 Digital AES/EBU Input: 0 Balanced Fixed Output: 0 Balanced Variable Output: 2 Unbalanced Fixed Output: 0 Unbalanced Variable Output: 2 Headphone Output: 1/4" High Drive with Headphone Crossfeed Director (HXD®) Input Level Match: No Home Theater PassThru: No Unbalanced Analog Connector Type: Premium gold-plated solid brass Service Port: 0
Control	Tone Controls: Bass and Treble Tone Bypass and Input Assign: Tone Bypass: Yes Input Assign: No RS232 Control Input: No Power Control Output: 2 Main, 2 Switched Rear Panel Data Port: 5
General Specifications	Multi-Chassis or Single: Single, two layer Output Meters: No Vacuum Tube or Solid State:  Vacuum Tube: (5) 12AX7A and (1) 12AT7 Power Consumption (On): 50 Watts
Dimensions & Weight	Unit Dimensions (W x H x D) 17.5" (44.45cm) x 6" (15.24cm) x 18" (45.72cm) Unit Weight: 25 lbs (11.3kg)