Emotiva XPA-11 Gen3 11-channel Audiophile Power Amplifier

₹ 244,000.00

Ooberpad brings you the Emotiva XPA-11 Gen3 - a 11-channel audiophile-grade power amplifier for home theatre systems. The XPA-11 is populated with three of High-Powered Single Channel Modules, and four Stereo Modules, for a total of three high-powered channels and eight lower-powered channels. This combination is ideal for a surround sound system that is used for both music and home theater listening, and includes height speakers. The three front speakers, which are the most critical for both music and home theater listening, are powered by the three high-powered channels. The surround channels, and the height channels, are driven by the lower powered stereo modules. Even though the channels differ in terms of maximum power output, they feature perfectly matched electrical characteristics, and the same superb Class A/B sound quality.

The XPA-11 is perfect for powering a 7.1.4 or 5.1.6 Dolby Atmos or DTS-X system or a 7.1 or 7.2 channel system that also includes two pairs of smaller speakers in other zones. The power output capabilities of the various channels on the XPA-11 were optimized to provide the best sound quality in real-world listening conditions; the front channels, which are the most critical for both dynamic music reproduction and crystal clear dialog, receive the most power.

Warranty

1-year manufacturer's warranty

Key Features:

  • Designed first and foremost to sound superb in all types of audio systems with all types of music
  • Low noise, low distortion, wideband amplifier design with traditional Class A/B output stage
  • Modern Efficient Circuit Design
  • Optimized Soft-Switch Class H™ power supply topology delivers improved efficiency without compromising audio performance
  • Switched Mode Power Supply (SMPS) offers all of the performance of a traditional linear power supply
  • Top quality parts and construction throughout for years of reliable trouble-free service
  • Heavy steel 4RU chassis with milled aluminum faceplate offers strength and rugged good looks
  • Solid machined gold-plated RCA input connectors provide a reliable connection with a wide variety of audio interconnects
  • Fully modular construction allows you to purchase as many channels as you need today, and then add more channels later when and if you need them
  • Flexible Signal Connections and Power Options
  • Gold plated five-way speaker binding posts with clear shields allow you to use a wide range of speaker cables with bare wires, lugs, or banana plugs
  • Choice of balanced or unbalanced input for each channel, independently controlled by reliable metal toggle switches
  • Remote trigger input and output allow the XPA-11 Gen3 to control and be controlled by other trigger-enabled equipment
  • Standard IEC power inlet fits all standard IEC power cables and most custom audiophile power cables

    Benefits of Emotiva XPA-11 Gen3 11-channel Audiophile Power Amplifier:

    Class A/B sound quality with optimized Class H efficiency
     

    The High-Powered Single Channel Modules used in the XPA-11 utilize a fully analog Class A/B output stage, and the highly regarded Soft-Switch™ Optimized Class H power supply topology, which increases their efficiency significantly without compromising their superb Class A/B performance and sound quality. At low power levels, each channel operates on a relatively low supply voltage, to minimize quiescent power consumption and standby power losses. Then, when the demand for power increases, it instantly and seamlessly switches to a higher voltage rail to ensure that the signal passes cleanly and without clipping. This process happens on a continuous basis - in real time, allowing greater overall efficiency, cooler operation, longer component life, reduced power consumption, and increased reliability. The Stereo Modules used in the XPA-11 utilize a fully analog Class A/B output stage, which is virtually identical to the output stage in the High-Powered Single Channel Modules, but operate from a more traditional single power supply voltage.

    Made in the USA with premium-grade components

    All of the new Third Generation XPA power amplifiers, including the XPA-11, are designed, assembled, and tested in the USA. Emotiva amplifiers are carefully engineered and designed with premium components to deliver the highest signal fidelity, power, clarity and punch.

    Where to buy?
    Buy the Emotiva XPA-11 Gen3 11-channel Audiophile Power Amplifier online at the best price in Mumbai, Delhi, Bangalore, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the Ooberpad team. We will help you choose better and give you all the support you need to take the right buying decision in India.

    Technical Specifications of Emotiva XPA-11 Gen3 11-channel Power Amplifier:

    Brand & Model Emotiva XPA-11 Gen3 11-channel Power Amplifier
    Audio Specifications (High-Powered Single Channel Modules)
    • Power Output:
      300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven
      550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven
      300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven
      490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven

    • Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB)

    • Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB

    • THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms

    • Signal to Noise Ratio (8 Ohm load):
      > 115 dB; ref FTC rated power; unbalanced input (A-weighted).
      > 86 dB; ref 1 watt; unbalanced input (A-weighted)

    • Minimum Recommended Load Impedance (per channel): 4 Ohms
      (which equals one 4 Ohm load or two paralleled 8 Ohm loads)

    • Damping Factor (8 Ohm load): > 500

    • Input Sensitivity (for rated power; 8 Ohm load): 1.5 V

    • Gain: 29 dB

    • Input Impedance:
      33 kOhms (balanced).
      23.5 kOhms (unbalanced)

      Audio Specifications (Stereo Modules)
      • Power Output:
        65 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven
        100 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven
        65 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven
        100 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven

      • Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB)

      • Broad Band Frequency Response: 50 Hz to 80 kHz +0/-1.5 dB

      • THD + noise: < 0.02%; at 60 watts RMS; 1 kHz; 8 Ohms

      • Signal to Noise Ratio (8 Ohm load):
        > 105 dB; ref FTC rated power; unbalanced input (A-weighted).
        > 85 dB; ref 1 watt; unbalanced input (A-weighted)

      • Minimum Recommended Load Impedance (per channel): 4 Ohms
        (which equals one 4 Ohm load or two paralleled 8 Ohm loads)

      • Damping Factor (8 Ohm load): > 500.

      • Input Sensitivity (for rated power; 8 Ohm load): 0.8 V (800 mV)

      • Gain: 29 dB

      • Input Impedance:
        33 kOhms (balanced).
        23.5 kOhms (unbalanced)

      Input and Output Connections
      • Input Connections (High-Powered Single Channel Modules):
        Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable

      • Input Connections (Stereo Modules):
        2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable

      • Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts

      • Trigger:
        Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required
        Trigger Output: 12 VDC; can drive any load up to 120 mA

      Front Panel Controls and Indicators
      • Standby: push button (halo ring changes color to indicate Standby or On)

      • Status LEDs: one per channel; blue.
        Status LEDs change to red to indicate a fault condition

      Rear Panel Controls and Indicators
      • AC Power switch: rocker switch (switches AC main power)

      • Status LEDs switch: disables front panel Status LEDs and dims Standby button halo

      • Input selector switches (one per channel): 
        metal toggle switches; select between balanced and unbalanced inputs

      • Circuit Breaker: press button to reset circuit breaker

      Dimensions (W x H x D) in inches
      17” x 8” x 19” (unboxed; including feet)
      17” x 7” x 19” (unboxed; without feet)
      24-1/2” x 12” x 24-3/4” (boxed)
      Weight 
      53 lbs / 24 kgs (unboxed)
      58 lbs / 26 kgs (boxed)

      Customer Reviews

      You recently viewed

      Clear recently viewed