NAD M22 V2 Stereo Power Amplifier

by NAD
Sold out
₹ 429,900.00

Check Cash on Delivery Availability for Orders under Rs 20,000/-

No Cost EMI: Avail No Cost EMI on Bajaj Finserve and select Credit Cards for orders above ₹3000 Details

EMI Guide


EMI for Rs.

Below EMI options can be availed while making payment. To avail EMI continue to check out and chose the Credit Card option for payment.

Country of Origin: Canada

Ooberpad announces the availability of NAD M22 V2 Stereo Power Amplifier. Enjoy a tactile experience of live performance through nuanced sound with empowering control and transparency with the NAD M22 V2 Stereo Power Amplifier. It is easy to find amplifiers that can excel in one or two areas, but the M22 is truly an amplifier that is everything rolled into one. Wide open-loop bandwidth, extremely low-phase shift, almost non-existent noise, harmonic and intermodulation distortion independent of load (load invariant), high current capability, low output impedance (high damping factor) uniformly at all audible frequencies - it is cumulative of superb performance. You just have to hear it to believe its incredible power.


1-year manufacturer's warranty

Key Features:

  • Hybrid Digital DAC Amplifier
  • Power increases 20% from 250 Watts X 2 to 300 Watts X 2
  • Redesigned power supply enables the increase in power
  • PowerDrive circuit is fine tuned to maximize dynamic power
  • Bridging mode transforms M22 V2 into a 900W mono amplifier
  • nCore™ technology by Hypex delivers near ideal amplifier performance
  • 3 position auto turn-on sensitivity switch allows for improved system matching

            Benefits of NAD M22 V2 Stereo Power Amplifier:

            Hybrid Digital Amplification
            Hybrid Digital Amplification

            The M22 is utilizing the latest nCore amplifier technology licensed from Hypex to provide a nearly ideal amplifier with distortion below measurement, ultra-high damping factor, and unwavering stability with any speaker. Tight, nuanced sound with total control and transparency lead to the best in class performance available. With nCore, Hypex has refined their UcD concept to new heights of perfection by improving the modulator for more accurate feedback subtraction and PWM generation. The all-discrete driver and output stage have also been improved for lower open-loop THD as well as lower idling losses, normally conflicting requirements with conventional IC driver circuitry. An added control loop incorporating an integrator with adaptive clipping enables 20dB more feedback to be used across the audio band because of its extremely low-phase shift resulting in a dramatic reduction in distortion across the audio band. This is added to UcD’s existing powerful characteristics of load invariance and high current capability, common bearings of great-sounding amplifiers.

            Perfecting Performance
            Perfecting Performance

            The output stage is only one of several circuits in the amplifier, and each must complement the other to obtain tio-of-theline performance. The amp is DC coupled throughout, from input to output, there is no capacitor in the forward signal path. Yet, it has a beneficial 12dB/octave roll-off below 2Hz. It does this using a unique circuit topology that is functionally a forward servo. It is however not a servo in the conventional sense as it does not measure DC at the output and send back a correction signal. Instead part of the input signal is fed to a side chain with a second order low-pass filter. The output of this is subtracted from the forward signal input to the second stage thus rejecting DC.

            Effortless Power
            Effortless Power

            Employing the latest generation of digital PowerDrive™, the M22 offers a minimum of 300W per channel with amazing reserves of dynamic power at lower impedances. The M22 is capable of >400W dynamic power per channel even in 8 ohms, >700W in 4 Ohms, and 1,000W in 2 ohms. Still need to power-boost it? Select Bridge Mode and the M22 offers 950W at 8 Ohms in Mono. It can effortlessly power any loudspeaker to live performance levels with amazing efficiency and low power consumption. Control for PowerDrive is derived by sensing the average output power, applying a time constant, and then cleanly hard clipping the signal thus limiting it to the rated continuous clipping power over a sustained loading. By controlling the power envelope maximum clean power is obtained for every operating condition.

            Clean and Dynamic

            The performance of the entire signal path is contingent upon the power supply; in this case a well regulated, but not too tight, custom switch mode design. This allows maximum dynamic power, very high current yet with very low distortion. Secondary supplies are individually regulated and decoupled at each opamp for lowest possible noise and maximum dynamic range.

            Where to buy?
            Buy NAD M22 V2 Stereo Power Amplifier online at the best price in Mumbai, Delhi, Bangalore, Chennai and all across India. Enjoy expert, prompt and courteous customer service from the team. We will help you choose better and will give you all the support you need to take the right buying decision in India.

            Technical Specifications of NAD M22 V2 Stereo Power Amplifier:

            Brand & Model # NAD M22 V2
            Continuous output power into 8 ohms and 4 ohms (Stereo mode)
            300 W (20 Hz-20 kHz at 0.1% THD, both channels driven)
            Continuous output power into 8 ohms (Bridge mode) THD+N (20 Hz – 20 kHz, CCIF IMD, SMPTE IMD, DIM 100)
            900 W (20 Hz – 20 kHz at 0.1% THD)
            THD+N (20 Hz – 20 kHz, CCIF IMD, SMPTE IMD, DIM 100)
            <0.005 % (250 mW to 290W, 8 ohms and 4 ohms)
            Note: Measured with Audio Precision AUX-0025 or Prism dS-LPF passive low pass filter
            Signal-to-Noise Ratio
            • >100 dB (A-weighted, ref. 1 W in 8 ohms
            • >120 dB (A-weighted, ref. 300W in 8 ohms)
            Clipping power (Stereo mode, at 1 kHz 8 ohms 0.1 % THD)
            >300 W
            Clipping power (Bridge mode, at 1 kHz 8 ohms 0.1 % THD)
            >950 W
            IHF dynamic power (Stereo mode, at 1 kHz 1 % THD)
            • 8 ohms: 400 W
            • 4 ohms: 700 W
            • 2 ohms: 1000 W
            Damping factor
            >800 (ref. 8 ohms)
            Frequency response
            ±0.1 dB (20 Hz – 20 kHz)
            Input sensitivity (for 300W in 8 ohms)
            1.73 V
            Gain level
            • Low: 19 dB
            • Medium: 24 dB
            • High: 29 dB
            Minimum input level for Auto Trigger
            5 mV at 1 kHz
            Standby power
            <0.5 W

            Gross dimensions (W x H x D)
            • 435 x 103 x 379 mm
            • 17 1/8 x 4 1/16 x 14 15/16 inches
              Net weight
              • 8.9 kg (19.6 lbs)

                You recently viewed

                Clear recently viewed